Cost to Install a Garage Door
Every quote is priced by the size, material, and features you choose, and we put it in writing before any work starts.
- ✓Same-Day Service
- ✓Licensed & Insured
- ✓On Call 7 Days
- ✓Free Estimates
What Actually Sets the Price of a New Garage Door
The biggest factor is size. A single-car opening runs less material and labor than a double-wide, and older homes in neighborhoods like North Kansas City and parts of the Northland often have non-standard openings built decades before today’s factory widths became the norm, which can call for a custom-cut door instead of an off-the-shelf size. Newer subdivisions in Lee’s Summit and Blue Springs are more likely to have a standard double garage, which usually keeps the door itself simpler to source.
Material is the next driver. Steel doors come in different gauges and layer counts, wood and wood-composite doors cost more to fabricate and finish, and aluminum or glass-panel doors are priced differently again depending on the frame and glazing. Insulation adds another variable: a door with a polyurethane foam core and a higher R-value insulates better against Kansas City’s summer heat and winter cold than a hollow or polystyrene-insulated panel, but it costs more to build.
Style and hardware move the number too. Windows, decorative overlays, faux wood finishes, and upgraded hinges or handles all add to the base price of the door itself. Then there is labor: removing and hauling away the old door, squaring and shimming a new frame, hanging panels, setting the torsion or extension springs to the correct tension for the door’s weight, and installing or reprogramming the opener. If your existing door still opens and closes but needs new hardware rather than a full swap, that is a different job with a different scope than a full garage door replacement, so it is worth being clear with your technician about which one you actually need before a quote is written.
Because every one of these variables changes the number, we do not quote off a phone description alone. A technician looks at the actual opening, confirms the size and any framing quirks, and walks through material and insulation options before writing a price, so the number you get matches the door that gets installed.
The Factors Behind Every Quote
Door Size & Configuration
Single, double, or custom-width openings each price differently, and older Kansas City area homes sometimes need a non-standard cut rather than a factory size.
Material & Construction
Steel, wood, wood-composite, and aluminum doors differ in gauge, layer count, and finish, which changes both material cost and installation time.
Insulation & R-Value
A foam-core insulated door holds up better against Missouri’s hot summers and cold snaps than an uninsulated panel, at a higher material cost.
Style & Window Options
Window inserts, decorative overlays, and faux wood finishes are priced as upgrades over a plain panel door.
Opener Compatibility
A heavier insulated door may need a stronger opener motor or new mounting hardware, which we check before the install date is set.
Removal & Haul-Away
Taking down and disposing of the old door and track is included in the scope, so the driveway is clear when the crew leaves.
How an Installation Quote Comes Together
In-home measurement
A technician measures the opening, checks headroom and track clearance, and notes anything unusual about the framing before any pricing is discussed.
Material and style walkthrough
We go over steel, wood-composite, and insulation options side by side so you can see what each choice actually changes about the door.
Written, upfront quote
You get a firm number in writing before we schedule anything, with no obligation to move forward.
Old door removal
On install day, the existing door, track, and springs are removed and hauled off so the opening is ready for the new door.
Installation and calibration
The new door is hung, the springs are tensioned to match its weight, and the opener is set or reprogrammed so the door travels smooth and level.
Final walkthrough
We test the door through a full open-close cycle with you, cover the warranty, and answer any remaining questions before we leave.
What Kansas City Homeowners Say
I got quotes from a couple of places and this was the only one that actually measured my garage before giving me a number. The door they recommended fit my opening exactly, no shims stacked up to make it work.
Our old door was original to the house and nothing about it was a standard size. They walked me through why a custom door cost more than the big box store estimate and it made sense once I understood what was actually involved.
Garage Door Installation Cost Questions
How much should I budget for a new garage door? +
Your budget should scale with three things: the size of your opening, the material and insulation you choose, and whether the opener needs upgrading to handle a heavier door. A single steel panel door without insulation sits at the lower end of the range, while an insulated wood-composite door with windows sits at the higher end. We give a written, itemized quote after measuring your actual opening so you are budgeting against real numbers, not a generic estimate.
What is the average cost to install a new garage door? +
There is no single average that means much, because a single-car steel door and a double-wide insulated wood-composite door are priced entirely differently. What matters more is getting a quote based on your specific opening, in a neighborhood like Lee’s Summit with a standard double garage versus an older North Kansas City home with a non-standard opening, since those two jobs can differ significantly in scope.
How much does Home Depot or Lowe’s charge to install a garage door? +
Big box retailers typically subcontract the installation to a local crew and add their own markup and scheduling layer on top, which can mean a longer lead time and less direct communication with the technician actually doing the work. Booking installation directly with a local company usually means faster scheduling and a technician who can answer material and sizing questions on the spot.
Is Costco a good place to buy a garage door? +
Costco sells garage doors through a similar subcontracted-installation model as other big box retailers, so the same tradeoffs apply: you are often working through a call center and a scheduling queue rather than a local technician who has measured your opening. For most Kansas City homeowners, a direct local quote gives more control over timeline and door selection.
How long does it take to remove and replace a garage door? +
A standard single or double door swap is typically a one-day job from removal through calibration, assuming the opening does not need framing repairs. Custom-sized doors or openings with rot or structural issues can add time, which is why we flag anything unusual during the measurement visit rather than on install day.
Can I install a new garage door myself? +
Hanging the door panels is only part of the job. Setting torsion or extension springs to the correct tension for the door’s exact weight is dangerous without the right bars and training, and a misjudged spring can cause serious injury. Most homeowners hire this out even if they are comfortable with other DIY projects, specifically because of the spring system.
Does a new garage door need a new opener? +
Not always. If your current opener has enough lifting power for the new door’s weight and the mounting hardware is compatible, it can often be reused. An insulated door weighs more than a hollow one, though, so we check the opener’s rated capacity during the quote visit and flag it if an opener repair or replacement makes more sense than reusing an older unit.
Ready to see what a new door would actually cost?
Get a technician out to measure your opening and walk you through material options, with a written quote before anything is scheduled.